3 Common Prodigy P2 Brake Controller Error Codes Troubleshooting

prodigy p2 brake controller error codes
prodigy p2 brake controller error codes

Most camping enthusiasts go out on frequent trips that will last a long time. This is why it is almost essential for them to own a large vehicle that can carry all of their luggage.

While having a motorhome will be the best solution, you should note that these are quite expensive. Additionally, if you already own a truck then paying so much extra for another vehicle with a strong engine is not recommended.

This is exactly why these users decide to get trailers instead. Although, the main problem with them is when you press the brakes on your truck when going at a fast speed. It is almost necessary that you have a good brake controller equipped.

Talking about this, the Prodigy P2 Brake Controller is an amazing option that you can go for but there are some error codes that it can run into as well. This is why we will be using this article to provide you with some troubleshooting steps that can be used.

Common Prodigy P2 Brake Controller Error Codes and Their Solutions

1. L Error Code

One of the best things about using the Prodigy P2 Brake Controller is that it has a control panel. This keeps you notified about the device and you can even use it to control it. The system also provides you with error codes that allow you to identify what is wrong with the device and how it can be fixed.

Talking about this, one of the most common error codes that you can get is the o.L code. Additionally, you will notice that the error light flashes two times every second. This means that the system has been overloaded causing it to shut down.

You can try resetting the device entirely to fix this issue. Just make sure that you completely take off the system and wait for some time before connecting it again.

2. c Error Code

Another common error code that many people can get on the Prodigy P2 Brake Controller is the n.c. code. This means that either the trailer is not connected or it is loose. There are many reasons why you can get the specific error code but these are all fixed by simply checking your connections.

Ensure that the trailer and brake controller are properly connected and all of their wirings are in good condition. This should help you in fixing the problem easily.

2. r Error Code

Finally, the last error code that you should be aware of is the E.r code. This means that the device is unresponsive and it has become faulty. There are troubleshooting steps for this and you will have to contact Prodigy directly. Make sure that you answer every question their customer service asks to ensure they identify your problem.

The team will then provide you with a solution that can be used. Make sure that you follow all the steps provided by them to fix your error. Aside from this, if you get any other error codes on your device then details about them are provided in the manual.

Leave a Comment