Jayco is a reputed company specializing in manufacturing high-quality RVs. With dozens of well-constructed vehicles, it has staked its claim on the hearts of thousands of RVers all over the world.
Recreational vehicles by Jayco allow you to carry electric appliances and provide the comforts of home while on the road. In most cases, these appliances are powered by batteries.
These batteries deplete over time, and when they do, it’s important to replace them to keep the appliances functional. However, the replacement process can be tricky if you do not have enough knowledge.
With that in mind, in this article, we will take you through the battery replacement process in the Jayco RVs. Let’s delve deeper without any further ado!
Jayco Battery Replacement
It’s a good idea to learn as much as possible about the battery’s construction, capacity, and quality standards before making a purchase.
First and foremost, make sure to check the energy density of your battery before buying. One way to measure the energy density of a system is to evaluate the potential energy against the system’s mass.
Therefore, the high density of your application translates to less bulk. On the other hand, a low energy density means the battery will be bulky and have a smaller amount of stored energy.
A higher power density means it can continue to supply the same amount of current even when subjected to higher demands.
Total battery life and charge life are the two most essential factors in determining a battery’s life cycle. What we mean by “charge life” is how long the energy stored in your device will last before it runs out of power.
Evaluate Your Needs
To choose a battery for your Jayco RV, your RV’s power consumption is the primary concern. Determine your energy needs and choose a battery accordingly.
If you intend to use multiple electric appliances at a time, you should invest in a heavy-duty battery. Alternatively, you can also install two batteries.
Comparing available batteries’ features and characteristics might help you decide on the most appropriate model for your needs. It would be good to look for a battery with a reasonable power limit, neither too low nor too high.
To do this, measure the voltage output of your old batteries and compare it to the voltage output of your new batteries. Once you have purchased them, you can install them right away. If you are unsure about it, consider seeking professional help.
If you are to install the batteries on your own, make sure to connect the terminals correctly. The positive terminal is to be connected to the negative terminal of the other battery.
How To Install a Battery in the Jayco RV?
- An RV battery has a lifespan of up to five years with proper maintenance. The battery can fail in as little as three years, especially if you reside in a hot climate. The higher temperature is linked with better storage capacity, but it could be a trade-off with longevity.
- Chronic undercharging can cause your batteries to fail before their average life span.
- Look for indications of corrosion on the battery wires and clean them if they are dirty. Avoid further corrosion by applying grease or petroleum jelly under the clamps.
- Read the manual with your automobile before you try to replace the battery on your own— it will take around 30 minutes.
- Be sure to get a high-quality replacement battery. Take your old battery to the auto parts shop to avoid confusion.
- You could overburden and destroy the charging mechanism if you don’t fully charge your new car battery before installing it. (It won’t work to revive a lifeless battery.)
- When removing the cables from a dead automobile battery, unplug the negative battery first.
- The dead battery can’t be removed from the automobile without removing the battery or clamping device.
- Once you have unplugged the cables, remove the old batteries and install the new ones. Connect the wires carefully.
- To keep the electrolyte solution from leaking, always store the battery in an up-right position.
- After installing the battery in the tray, fasten it using the clamping device. One of the leading causes of an auto battery dying early is vibration, which can be mitigated by this.
The Bottom Line
Installing new batteries in your Jayco motorhome can be confusing, especially if you are doing it for the first time.
This article discusses some factors that you should consider before purchasing new batteries and how to install them properly. Consider investing in quality batteries for better performance and long life.