Furrion Monitor Not Working? Try These 3 Troubleshooting Steps

furrion monitor not working
furrion monitor not working

People all around the world enjoy going out on camping trips with their family and friends. This gives them time to make new memories while also exploring new areas. Although, some enthusiasts want to go out on these trips for a much longer time. When it comes to them, they must have the best possible equipment.

Carrying all of this on a smaller vehicle can be quite difficult which is why it is better that you have an RV or motorhome with you. The main issue with these vehicles is that you can have a lot of trouble trying to reverse your vehicle. Installing a back camera of your RV will fix this issue. Although, people have recently been complaining that the Furrion monitor for their camera is not working. We will be using this article to provide you with some steps that can be used to fix this problem.

Furrion Monitor Not Working

1. Check Wirings

Furrion is a famous company that is known for manufacturing some of the best equipment for motorhomes and RVs. The brand has numerous devices that all come with features installed on them. The Furrion monitor on a vehicle is used to play songs or even use maps for navigation. Although, another benefit of having this is that you can pair it with the camera from Furrion.

Considering this, the Furrion monitor not working can be an issue with the wiring. The product comes with a manual that can be used to help with its installation. Considering this, if you have recently bought your camera then there is a high chance that your issue is from the wirings. Consult the manual to ensure all of your wirings have been installed in the correct position.

Aside from this, the problem you are getting can also be from the cables being loose or disconnected. This is quite a common issue and you can confirm it by taking off the panel. Make sure that all of the wires have been connected to the right spot tightly. Additionally, remove all the dust covering the connectors. This is also known to prevent connection for your device.

Once you have removed all the dust and connected your cables tightly. The monitor should now start working perfectly without any further problems. If you notice that the pins for your connectors have moved slightly out of position. Then you will have to push them back into the right spot. This is quite tricky as the pins are sensitive and they can break easily.

If this happens then you will have to replace your entire connector. Luckily, these are easily available from most electrical stores. The only thing that you will have to look out for is the voltage ratings on these. Make sure that they match with the current connector you are using.

2. Signal Issues

Another reason why you can get a problem like this on your Furrion monitor is if there are some signal issues with it. This is quite common and the main reason behind a problem like this is that the position of your camera or monitor might not be optimal. Simply switching the position for these can allow you to fix the problem.

Although, if your display is still not working then you can try resetting it once. This can be done by holding down a pin inside the pinhole on your display. Keep it held down until your display reboots. Once this happens, the device will take some time to completely reset itself. The process removes all the configuration changes that you had made to it along with the problem you were having.

3. Contact Customer Support

Finally, if you are still having the same issue even after following the steps mentioned above. Then there is a high chance that your device has now become faulty. This is quite rare but there is still a chance that your display might be defective.

Contacting the support team should help you in getting rid of the problem. Keep in mind that you will be required to provide all the information about your problem in detail. The company will then ensure that they find the root of your issue. You will then be provided with a viable solution that can be used. Alternatively, you will have to send your monitor back for repairs.

Leave a Comment