Going out on camping trips with your family and friends can be a lot of fun. Although, some enthusiasts want to go out on these trips much more frequently. When it comes to them, they must bring the best possible equipment with them. This will ensure that the users can survive easily while they stay out of their homes for such a long time. However, you should note that these people also bring vehicles like RVs and motorhomes with them.
These come with numerous features that help users stay comfortable even while they are out camping. Talking about this, one of the best companies that you can get these vehicles from is Winnebago. They have amazing vehicles but there are also some issues that you can run into. Considering this, we will be using this article to talk about some common problems that you can get on the Winnebago Infotainment Center along with ways to fix them.
Most Common Winnebago Infotainment Center Problems
1. Check Wirings
The most common issue that people have reported getting on their Winnebago Infotainment Center is that the display stops responding or does not switch on at all. Getting a problem like this while you were out traveling can be quite annoying. Although, you should note that several things can cause this issue in your infotainment center. Considering this, you should go through all the troubleshooting steps carefully.
This will ensure that you find the exact reason why you were getting this issue, additionally, this should also help you in preventing the same problem from happening again. With that being said, you can start by checking the wirings for your device. Sometimes the problem can simply be from these coming loose. Alternatively, there is also a chance that the wirings supplying current to your display might be damaged.
Whatever the reason might be, carefully observing the cables should help you in identifying the exact problem. In case of any damaged wires, the user should be able to notice cracks or breaks. If you do find these, then the only way to fix your issue is by replacing these wires with new ones. On the other hand, if there were no damages to the cables then connecting any loose ones back in tightly should help in getting rid of the problem. You can also put tapes on these wires to ensure that they do not come off again.
2. Display Not Working
Another common problem that many people using the Winnebago Infotainment Center have complained about is that their display stops working. This can be quite frustrating to deal with as most of the control is touch-sensitive. Although, you should note that this issue is sometimes caused by the display being covered in dust.
Considering this, it is recommended that you clean the display on your Winnebago Infotainment Center frequently. This will ensure that no dust particles stuck on your screen prevent you from using it. Although, if simply cleaning the display does not work then you should check if your hands are wet. Having water particles on your fingers can also prevent you from accessing the display on your Winnebago motorhome. In most cases, the steps mentioned above should help you in getting rid of the problem.
3. Faulty Display
Finally, if you are still getting the same issue then there is a high chance that the display on your Winnebago vehicle has gotten damaged. Before contacting the support team for your motorhome, you must try resetting the device once. This can be done by holding down a pin on your display. If the same issue is appearing again then your only choice is to contact the support service. Make sure that you tell them about your problem in detail and do not leave out anything important.
The team will then look into your issue and provide you with solutions that can be used. Sometimes a new software installation on the display center can help in fixing issues with it. However, if even this does not work then the team will have to replace your Winnebago Infotainment Center with a new one. If you still have your warranty service then the brand might be able to provide you with this replacement free of cost.
