Recreational Vehicles or also commonly known as RVs are vehicles or trailers that come in large sizes. These are equipped to provide their users with living quarters that feel the same as your home.
These include bathrooms, bedrooms, and even kitchens. Considering this, people who enjoy going out on camping trips frequently like to purchase these vehicles.
Though, you should note that the maintenance for these is essential as well. This prevents the user from running into problems while they are on their trips.
While some of the major things to look out for are the engine, tires, and batteries on your vehicle. There are also some other things that the user should be aware of.
Carbon Monoxide Detectors
While most equipments like fire detectors are already equipped in RVs to keep them secured. You should note that a Carbon Monoxide detector is another important thing that you should install in your vehicle. These need to be purchased separately and then put in your vehicle. If you are confused about what these do.
Then a short answer is that these detectors will notify you about any carbon monoxide elements in your surroundings. These can be quite dangerous and there is no way to tell if the air you are breathing contains this. Considering this, the detectors help both you and your family in staying safe from these dangerous chemicals.
Where To Mount Carbon Monoxide Detector In RV?
While most newer RVs that are now coming out already have these installed in them. However, if yours does not then it is recommended that you get this installed as soon as possible.
The most important thing to consider when installing these detectors is their location. This will help you in getting the best possible results with the equipment.
It is usually recommended that you place the detectors in the center of your vehicle. Additionally, it should be about 5 feet above the ground. This is essential as Carbon Monoxide air is lighter than Oxygen and rises from the floor.
Installing the detector above the ground should help it in detecting the gas easily. Finally, you should also keep in mind that you place it in a location where you usually sleep. This will help you to wake up from the alarm in case it detects the gas particles.
Wired or Batteries?
When installing the detectors, you should also check what their connection type is. Usually, most detectors come with one out of the two options. Either it will work with batteries or it will require you to run a wire through it. Considering this, you must place the equipment in a place where it can be plugged through a wire.
As for the batteries, you will have to replace these frequently and keep a check over your device. One recommendation is that you keep some spare batteries stored in your vehicle. These can then be used whenever your equipment runs out of the older ones. Alternatively, you can get a pair of rechargeable batteries for your Carbon Monoxide detector.