Camping enthusiasts own large vehicles like motorhomes and RVs. This is because these come with numerous features which are all provided to ensure people have a relaxing time on their trips. These include having large rooms that are completely furnished. You can easily rest in your vehicle even while you are traveling. Aside from this, people can use electrical appliances in their motorhomes by using the outlets installed.
Although, keep in mind that the electricity in your vehicle is limited. This is why you have to ensure that your motorhome does not run out of power while you are traveling. Talking about this, one problem that people run into with their problems is that their converter stops working. This is why we will be using this article to provide you with some common problems that you can run into with WFCO WF-8735-P along with troubleshooting steps. These should help you in getting rid of the issues so that you can continue using your vehicle.
WFCO WF-8735-P Troubleshooting Steps
1. Checking Wires
Having a converter in your RV or motorhome allows you to connect external power sources to your vehicle. These can be used to either start-up electrical appliances without having to worry about your batteries getting drained. Alternatively, you can use these to charge up your batteries instead. Whatever the case might be if the converter on your vehicle stops working. Then there is no way to use an external power source on the motorhome.
This can be quite annoying to deal with, however, usually, these issues are due to the wirings of the device. There are a few cables that have to be installed tightly that will carry all of the electricity in your vehicle. If these somehow come off or loosen up then the connection will be cut off. The only way to fix this problem is by finding the disconnected cables and then installing them back in.
Although, in some cases, the issue you are getting can also be from the wires on your converter being damaged. You can use a voltmeter to test these but, the procedure is quite dangerous. This is why a better solution is that you contact a specialist to help you out. They will look into your wirings and even replace them if required. This should help you in getting rid of the problem so that you can continue using your converter.
2. Batteries Not Getting Charged
If all the wires for your converter are connected tightly but the batteries on your vehicle are not getting charged. Then there is a chance that these devices are running into some issues. The most common problem that your battery can have is that it is low on water. You can simply fill up the device back with water and then try charging it. However, if this does not work then you should check your terminals.
These can get covered with sulfate layers over time. Considering this, you must keep your battery clean by removing all these layers. If you have not been doing this, then there is a high chance that your terminals have now been covered with sulfate. This will cut off the connection for your device as the debris can prevent electricity from passing through it.
You can simply remove all this by scrubbing the terminals. However, if the material is stuck then you will have to pour some warm water on it. This will soften the material, allowing you to easily take it off. Once done, make sure that you charge your battery a little using an external source or jumpstart it so that it can start charging again.
3. Defective Converter
The WFCO WF-8735-P comes with a manual that can be used to check the different parts of the converter. If you are running into any issues then following the steps provided will help you in getting rid of them. Although, if none of these works then there is a high chance that your converter has become defective. When it comes to this, your only option is that you contact the customer support service for WFCO. The company will look into your device to figure out what the problem with it is. They should then provide you with a replacement unit or fix the faulty converter for you.