Silverado Backup Camera Not Working – 3 Solutions To Try

Going out on camping trips with your family and friends can be a lot of fun. Although, if you are going to stay for more than just a few days. Then you must carry the best possible equipment with you. This should help you in ensuring that you have an enjoyable experience. When it comes to carrying all of this, you should have a large vehicle with you.

Although, the main problem that people have when driving these is with its clearance. One way to easily reverse a large truck or motorhome is by having a backup camera on them. The Chevy Silverado comes with a backup camera installed on it but some people have reported that it is not working. If you are getting the same issue then here are some simple steps that can be used to fix it.

Silverado Backup Camera is Not Working

1. Check Wirings

The main objective of a backup camera is so that you can easily reverse your vehicle. The camera provides its users with a full view behind their car making it much easier to avoid any accidents. Although, if your camera is not working then it can be quite difficult to reverse your car. Although, you should note that these devices are installed on your vehicle through small connectors.

This is why if you are getting a problem like this then you should start by checking the wirings for your camera. Make sure that these are all tightly connected. Sometimes the wires can come off which will interrupt the connection. Considering this, once you have installed the cables back in, the camera should now start working.

Additionally, you must observe the wires for your device carefully. If you notice any cracks or breaks on them then there is a high chance that these require a replacement. These wires usually get damaged when you have not routed them correctly. Considering this, the problem can easily be avoided. Although, once these wires break or get damaged, the only way to fix your device is by replacing them.

2. Reset Display

The backup camera on your Silverado is connected with the display on your vehicle. This is why the camera not working can also be a problem with your display. If that is the case, then you should be able to fix the device by accessing the settings of your LED. Make sure that you had not changed any configurations that you were unaware of.

Simply switching these back to default should help you in fixing your problem. Although, if you are unable to find these then another solution is that you reset the display. This will remove all the changes you had made along the root of your problem. The procedure is quite simple and you only have to hold a small pin in your display.

You will notice that a pinhole for rest is provided on the device. Holding the pin inside it for a few seconds will shut off the display. Once this happens, you will have to wait patiently for a few minutes. The LED should reboot several times after it becomes stable, the problem you were having should now be gone.

3. Contact Support Team

Going through the steps mentioned above should help you in getting rid of your problem. Although, if you are still running into the same issue. Then there is a high chance that there is something wrong with your camera. Sometimes the problem can be from the equipment being broken. However, the same issue can also be from the camera running into some technical problems. Whatever the case might be, trying to find the exact reason on your own will take a lot of time and effort.

This is why a better solution is that you contact the support team for Silverado instead. Make sure that you provide them with detailed information about the issue. This will help the team in finding what is causing the problem so that it can be fixed as soon as possible. Most technical issues can be fixed by following a set of instructions provided by the support team. Although, if the error was from your camera being faulty then you will have to get this replaced with a new one.