Shower Diverter Not Staying Up? Try These 3 Tips!

shower diverter not staying up
shower diverter not staying up

People all around the world enjoy going out on camping trips with their family and friends. Although, if you are someone who wants to stay on their trips for a much longer time. Then you must have a motorhome or RV with you. These vehicles are completely furnished which allows people to comfortably rest in them. Additionally, you can even find numerous other features on your vehicle along with this.

The only thing that you will have to keep in mind is that most of the services depend on what brand you get your vehicle from. Dealers will also provide you with the option to select what appliances are required. Aside from this, no matter how good your vehicle is it can still run into some problems. One common issue that has been reported is that the shower diverter is not staying up. If you are also getting the same problem then here are some steps that should help you in fixing it.

Shower Diverter That’s Not Staying Up

1. Clean Shower Diverter

Shower diverters come in various shapes and designs. Although, one of the models has a small spout on them that you can pull up. This will prevent water from flowing through the shower tap allowing you to close the connection. Simply pushing this downwards will allow you to start getting a constant supply of water. The main problem that some people have is with the diverter not staying up, this causes water from the shower to continuously flow.

Considering this, it can be quite annoying for people to run into an issue like this. Although, one of the main reasons why you might be getting a problem like this can be that your shower diverter is filled with rust. This is quite common and you will eventually run into an issue like this. The best solution for this is cleaning up the diverter using a strong solution like vinegar or water. You can put this solution in a bag and then tie it to your shower diverter.

Make sure that the solution is in contact with the diverter at all times. Leave the bag like this for several days and keep on checking that it does not come off. Usually, applying a rubber band should help with keeping this attached to the diverter. After all of the rust has come off from your device, the user can take off the bag and clean their shower. You can then try pulling up the diverter and it should stay like that without any more problems.

2. Try Soaking the Whole Sprout

If you are still getting the same problem even after trying out the steps mentioned above. Then there is a high chance that all the rust has traveled to the back of your sprout. If this happens then you should remove your device. This is usually installed by different procedures depending on where you got it from. This is why you can consult the manual for your shower diverter to check how it comes off.

After you have taken off the device, dip it in a bowl that can hold the solution of vinegar and water. Additionally, make sure that the entire diverter is dipped in the bowl. Repeat the same steps mentioned above to ensure all of the rust comes off. You can then also lubricate the diverter mechanism so that it works in the best way possible. This should take some time but it should easily help you to get rid of your problem.

3. Replace the Shower Diverter

Sometimes even after trying all the steps mentioned above. The user can still run into problems with their shower diverter. This is quite annoying but the main reason why you are still unable to keep the shower diverter up is that it might be damaged. The only way to fix this problem is by replacing the device with a new one.

You might be able to replace only the diverter. Although, most companies do not provide small replacement parts for their devices. Considering this, you can contact the support team for your product and talk to them about the problem. If they have replacement parts then you should be able to get them. However, if not then you will have to get the entire shower diverter replaced.

Leave a Comment