Most camping enthusiasts own large vehicles like RVs and motorhomes. These come with numerous features that help in ensuring campers can have a fun time on their trips. This includes having rooms that are filled with furniture that you can rest on. Additionally, you get tons of storage that you can store all of your luggage in. While there are numerous other features provided on these vehicles, you should note that most of these depend on what brand of vehicle you purchase.
This is why it is important that you carefully go through the specifications for these motorhomes before buying one. Talking about this, having slide-outs on your vehicle is another great feature. Although, if your motorhome does not have it then you can purchase it from Lippert instead. The Schwintek slide from them is amazing but there are also some problems that you can run into with it. This is why we will be using this article to provide you with a list of issues that you can get. Moreover, we will also provide troubleshooting steps to help you in getting rid of these problems on your Schwintek slide.
Schwintek Slide Troubleshooting
1. Slide-Out Is Stuck
Slides are small rooms that can be extended with the press of a single button. These allow people to get more space in their motorhomes while they are resting. Having room to move around in can be amazing but there are also issues that you can get with these devices. One of the most common issues that you will notice people complaining about is their slide-out getting stuck.
If this is happening to you as well then you can start by checking your gearbox. Most slides including the Schwintek slide from Lippert come with a security feature on them. This prevents the device from moving while your vehicle is moving. Considering this, make sure that you have your motorhome in parking mode before trying to open your slide-out.
In case it is still stuck, you can also try completely retracting the slide. If the button is unresponsive then the wirings for it might have come off. You will have to open up your panel and check all of its cables. If you notice that any wires had gotten disconnected, then make sure that you install them back in. Other than this, sometimes the wires can also get damaged. Considering this, if you notice any cracks or breaks on these cables then make sure that you get them replaced with new ones.
2. Slide-Out Not Completely Extending
Another common issue people report is that their slide-outs stop extending completely. Alternatively, you might even notice that your slides are not closing properly. The main reason behind both of these issues is that there might be something stuck in the gears of your slide-out.
With time, dust can start gathering inside the moving parts of your slides which eventually clogs it. Considering this, you must clean your slide-outs carefully to prevent issues like this. Although, if the device is already getting this problem, then you can start by extending it. Now start cleaning its moving parts and remove any dust that is stuck on the gears and motor.
This might take some time but you must get rid of any clogs and debris from these parts. Once you are done with this, start lubricating the gears with oil. This helps the parts in moving efficiently and preventing problems in the future. Finally, you can now test your slides to confirm if the problem is gone or not.
3. Contact Lippert
Usually, the steps mentioned above are enough to fix most problems with slide-outs. However, if your Schwintek slide is still running into issues then there is a high chance that it might be damaged. You might be able to fix the faulty part on your own but this will take a lot of time.
Considering this, a better solution is that you contact the support team for Lippert. They will look into your problem to find the exact reason for it. You will then be provided with a list of troubleshooting steps that can be used to fix the issue. Alternatively, the team might ask you to send in your slides so that they can repair them.
