People all around the world enjoy going out on camping trips with their friends and family. These can be quite enjoyable as long as you take proper precautions. Packing your equipment can sometimes be the most difficult part of your trip. This is because you have to ensure that you have the best possible equipment with you at all times. Carrying all of it can be quite difficult which is why people purchase larger vehicles.
There are tons of features that these motorhomes and RVs come with. Although, one of the best ones is slide-outs. These are separate rooms in your vehicle that can be extended or retracted whenever you want to. While these can be amazing, there are also some problems that you can run into with them. One common issue that many people complain about is the RV slide out not flush against the trailer. If you are also running into the same issue then here are some simple steps to fix it.
How to Solve RV Slide Out Not Flush
1. Close Slides Again
Depending on what brand you get your motorhome from, the features on it might vary. Considering this, there are two types of slide-outs installed in a vehicle. One of these includes models that can be extended by pressing a single button on your motorhome. On the other hand, some variants have to be opened manually.
The main issue people have with these slides is that they will be slightly tilted. This can either be from the top, bottom or sides. Considering this, one of the best methods that can be used to fix this issue is opening your slides completely and then closing them again. Keeping this in mind, make sure that you try this once and check if the problem is gone. If you are still getting the same issue then move on to the next step.
2. Clean Parts
Sometimes dust or debris can prevent your slides from closing completely. Considering this, the problem can also be from something being stuck in your parts. This is why you must clean your slides frequently. First of all, you will have to extend your slide out completely. Now clean all the moving parts as well as your seals. Make sure that all debris and dust is removed so that you can close your slide-out again.
3. Lubricate System
Finally, the steps mentioned above should be enough to fix the problem. Though, another thing that you should do when you clean your slides is lubricating them. This should help the system is working much better. Additionally, this helps in preventing any future problems like the slide-out from getting stuck.
In case you still have the same issue. Then you should contact your dealer and notify them. There might be something wrong with your motor or gears. The dealer should look into the problem to find what is causing it. You will then be provided with a solution that can be used to get rid of the issue.
