Keeping your vehicle maintained is one of the most important things. If you carefully check them then you should be able to prevent most problems with it. This helps in having a safe and comfortable experience when going out on long trips.
Some people who do not know technical stuff can find it hard to maintain their RVs and motorhomes. Although, companies have started to manufacture products that make this process easier.
You can simply install a monitor panel on your vehicle. Which will then give you detailed information about most specifications of your RV. But you should keep in mind that the sensors that you get usually depend on the model of monitor panel you are selecting.
While using these devices, you might sometimes run into a problem with it. This is why we will be using this article to provide you with troubleshooting steps about your RV monitor panel.
RV Monitor Panel Troubleshooting
- Wiring Problems
The first thing that you should check when your RV monitor panel is not working is the wiring on it. Sometimes the current coming to the panel can get disrupted if there are any fluctuations in it or the wiring gets damaged. This is why you must take a reading of it before proceeding with any other troubleshooting steps.
Usually, it is recommended that you ask a professional to check the wiring for your vehicles. It can be dangerous to touch these wires if you do not have any information about them.
Although, if you want to proceed on your own then you use a voltmeter to take readings. If there is no power then there might be a problem from the backend or you might have to replace your wiring.
Confirm this by connecting the monitor panel to another power source. Lastly, you can also check the battery on your vehicle to see if there are any problems with it. Sometimes the battery can get covered in dirt which prevents current from flowing through it.
You can easily clean it up using warm water and scrubbing off the dirt from the connectors on them. Additionally, fill up the water level on your batteries if it is running low.
- Configuration Error
If you purchase an RV monitor panel then you should note that these require users to configure them on their own. You can use the manual given to them to go through the procedure.
However, if you are still having problems then you should contact the helpline for the company. The live support team should be able to help you in identifying the issue and fix it. They will also go through the setup process with you to ensure there are no problems.
All the circuit boards, sensors, and panels must be connected according to the manual. If there is even a single mistake in these connections then your panel might fail to function. If you have already set up your system and it is not working.
Then you should take it off entirely and connect the equipment back in carefully. This will most likely fix the problem that you were getting previously.
- Clean Up Tanks
Another common issue that most people have is that their device starts to give off no reading about their tanks. You should note that the sensors used by these RV monitor panels are really sensitive. This means that if there is any dirt in your tanks then the sensors can have trouble trying to take a reading.
Alternatively, the issue can also be caused if you set up your sensors in the wrong spot. This is why you should clean up your tank and ensure that it is filled with mineral water.
Now remove the sensors and install them in the positions suggested by the company. This will help you in getting back the readings of your tanks. In some cases, the problem can also be that you are either getting a high or low reading on your panel.
The fix for this process is also the same. The panel also contains an option to adjust the sensitivity of its readings. You can go through it and match it with your tank’s specifications. This should help you in getting the most accurate rating possible.
