How To Repair RV Corner Molding? Explained

rv corner molding repair
rv corner molding repair

RVs are being in great demand today as they are the next-level vehicles for all sorts of needs you might be able to think of. Especially for those who have a thing for adventures and like to go out camping, RVs are a must have vehicle as they allow you to travel without a single thought or worry on your mind providing you the right road experience.

Not only that, but the RVs are also exceptionally great with the convenience to carry all the equipment you are going to need for camping.

The RVs are not only exceptionally great with handling all the luggage and equipment for you, but there is a lot more to it.

The RVs can be the best thing for your camping as you can sleep in them as well having the comfort and safety even on the country side. Yet, you also need to make sure that the RVs are in perfect condition to avoid any sort of inconveniences on the journey.

Especially if the side molding is not right, that can cause you a lot of different problems. So, a few key factors that you will need to keep in mind for getting the side molding repaired are:

RV Corner Molding Repair

Chose The Right Material

You need to know what sort of materials you can use on the side molding to make it work properly for all sorts of atmosphere and different terrain that you need to take it to.

Aluminum or fiber are the two most common materials being used for the side molding and you need to make sure that you study about them both for a better experience and decision for the side molding.

Aluminum is pretty much more durable and that is why it is being used the most. Another important thing that you will need to know about aluminum is that it is easier to fix and replace and will not cost you a fortune.

Aluminum can also be repaired and that makes it one of the best and most affordable materials that one can use for their RV cabin or the side molding.

The second one is Fiber and it beats aluminum in terms of both durability and reliability. Not only that, but the fiber is also extremely lightweight so you will not have to worry about the excessive weight on your RV cabins either.

Yet, you will need to know that fiber might be a bit costly to get your hands on and to install it on your RV for the side molding. It provides better insulation than Aluminum as well, but it is not repairable and you will need to change it whole if needed be that can increase your cost.


Get It Done Right

Another thing that you will need to be careful about is making sure that you are getting it done right and that you don’t have to face any problems later on. The best way is to take the RV to a dealership and they will be able to ensure that they are repairing the RV corner molding in the right manner.

It needs precision and perfection to make sure that the side molding is repaired in the perfect manner to not face any sort of problems.

You will need to take care of the shape as if it is off shape, that can cause you all sorts of problems with the air drag and that will be a big trouble to properly balance the vehicle while maneuvering or driving at higher speeds.

You will also need to ensure that you are getting it done right and there are no leakages or spots left behind.

It goes without saying that if there is some hole left between the side molding or the body of your RV, that can cause you all sort of troubles. It will leak the air and that can be troublesome in proper insulation and maintaining the temperature for your RV cabin.

It can also be troublesome for you in times of humidity or there is rain, and of course you will need to beware of insects in the country side as well. So, you will need to make sure that you are finding the right technician if you don’t feel confident enough to do it on your own.

Leave a Comment