Having a recreational vehicle or motorhome with you can be amazing if you enjoy going out on trips. These provide you with a kitchen, bedroom, and bathroom which makes it feel like you are traveling in your own home.
Additionally, the storage provided in these vehicles allows you to take all of your equipment with you without any worries.
Though, RVs and motorhomes are large vehicles that can be a little hard to steer when driving at high speeds. Considering this, for the safety of others, these vehicles have to use clearance and running lights on them.
These make it easier for others to notice that a large vehicle is being driven. Although, some users have reported that their RV clearance lights are not working. This is why we will be using this article to provide you with some troubleshooting steps that can be used.
How to Fix RV Clearance Lights Not Working?
- Check Wirings On Plug
The clearance lights not working on your RV are quite a common issue. Considering this, there is no need to worry about this as you should easily be able to fix it. Though, keep in mind that several factors can cause this problem. This is why you have to first point down the exact reason that is causing your issue.
Additionally, you must follow all the steps mentioned here to help you in fixing this as soon as possible. The first thing that you have to look out for are the wirings for your clearance lights. These can come off or break down easily. Considering this, you can carefully check them to see if any of these have gotten loose or cut down.
If you notice any damages then get these wires replaced with new ones. Alternatively, if these had just gotten loose then you can tighten all of the connections. Checking if the current is properly flowing through the wires can be hard to do on your own.
This is why you should contact a specialist to help you out. Although, if you are familiar with how these connections work then using a voltmeter should assist you in fixing the issue.
- Clean Ports and Connectors
Once you have checked that all the wirings are working fine. The next things that you should move on to are the connectors and ports. Start by taking off the plugs and then cleaning off all the dust. Make sure that you carefully take out the plug as trying to move it while it is connected can damage the pins. Take out all the dust from both the ports and plugs.
You can then move on to checking if there is any rust or corrosion formed on the pins. If there is any then you will have to remove this as well. Sometimes wiping off will not remove the corrosion formed and this can completely stop current from flowing through the pins.
Talking about this, you will either have to use a cleaner or use warm water to help you soften the corrosion. This can then be wiped off with ease allowing you to fix the problem.
- Pins Might Be Damaged
Once you have checked the steps mentioned above but are still getting the same issue. Then there is a chance that your pins might have gotten damaged. This is quite common and requires the user to either replace the plug or try fixing it.
You can observe the pins to see that there is a small space between them. Sometimes these can get connected which stops the connection. Simply moving them apart with a screwdriver or knife will fix these.
Though, you have to make sure that not a lot of force is applied to them. This is because of the pins being extremely sensitive. Considering this, if the pins break down when trying to push them apart or if they are already damaged.
Then you can purchase a new plug and replace it with your current one. There are a total of two screws that need to be removed to change the plug. This is extremely easy to do but make sure that you connect all the wires properly to the pins.