3 Common Intellitec Problems Troubleshooting

intellitec troubleshooting
intellitec troubleshooting

Going out on camping trips can be a lot of fun. Although, you must bring the right equipment with you. Carrying a lot of these can be difficult on smaller vehicles. This is exactly why most people decide to purchase larger vehicles like motorhomes and RVs. These have tons of storage in them as well as numerous features to keep their users at ease. However, keep in mind that it is also essential that you keep your vehicle maintained.

This will ensure that there are no problems with it while you are on your trip. Talking about this, companies like Intellitec have come up with products that can monitor the performance of your vehicle. These can be used to make the maintenance process much easier. Although, there are some problems that you can run into with these. This is why we will be using this article to provide you with some common issues that can be found on the Intellitec devices along with their troubleshooting steps.

Common Intellitec Problems Troubleshooting

  1. Connection Problems

Intellitec is a famous company that is known for manufacturing monitoring systems that can be used on large vehicles like RVs and motorhomes. There are many different models that you can get and the number of features on your device will depend on which lineup you got. Although, you should note that the installation process for most of these is quite easy. This is why it should not take much time to install them on your vehicle.

If you are having any issues then it is recommended that you use the manual provided by Intellitec to help you with the process. Talking about this, sometimes the overall installation for your device might be correct but it still stops working after some time. In this case, you should keep in mind that the problem is most likely due to the connections being loose or coming off. This is why the first thing that you should do is to open up your monitoring system and then observe its wirings.

Make sure that none of these had gotten damaged or come off. If you do notice any bents or cuts then replace the cables with new ones. Usually, any damages on the wires come from there being too many bends on it when routing. Alternatively, you might have put on too much pressure on the wire. Whatever the case might be, ensuring that all the connections are working perfectly should help you in fixing any issues with your monitoring system.

  1. Check Background Power

Sometimes when trying to use your electronic monitoring system, you might notice that it keeps on switching off. Alternatively, it might stop showing you readings which can be quite annoying. Although, you should keep in mind that most issues like this are usually caused by a fluctuation in power. This is why it is recommended that you use a voltmeter to take readings of the current coming from your device. People who are unfamiliar with how to do this should contact a specialist instead.

This is because checking electrical wires on your own can be quite dangerous and you should avoid doing this. However, if you still want to try this on your own then start by checking the current your device is receiving from the backend. If this is fluctuating then there is a high chance that there are some issues with your batteries. You will have to access these and check what is causing the problem. In most cases, batteries will start to run into problems when the water level on them drops down. Alternatively, you might also experience some issues when the terminals on your batteries are covered.

  1. Monitor Might Be Faulty

Finally, if you are still having trouble when trying to use the monitoring system from Intellitec. Then there is a high chance that your device might have gotten damaged. This can happen due to fluctuations in current or the equipment might simply be broken when you got it. Whatever the case might be, you should try contacting the support team for this company. Make sure that you tell them about your issue in detail so that they can provide you with a suitable solution. Going through this should help you in getting rid of your problem.

Leave a Comment