People all around the world enjoy going on camping trips with their family and friends. Although, many enthusiasts want to stay on these trips for several weeks or months at times. When it comes to this, you should note that it is important to keep all the right equipment with you. However, carrying all of this in your car can be almost impossible. This is why one option is purchasing a large RV or motorhome. These vehicles have numerous features that will keep you at ease.
Although, when it comes to controlling the power in your vehicle, this can be hard to manage on your own. This is why companies like Intellitec have come up with battery control centers that can help you in managing your vehicle. While these might be amazing to use, you should keep in mind that there are also some problems that you can run into. This is why we will be using this article to provide you with some troubleshooting steps that can be used to fix issues on the Intellitec Battery Control Center.
Intellitec Battery Control Center Troubleshooting:
- Battery Does Not Charge
The battery control center on your vehicle is used to manage the power being used on it. The system switches between different power usages depending on what you are doing on your vehicle. While driving around, the alternator on your engine will keep the coach batteries in your RV charged up. On the other hand, once you park your vehicle the power usage will be switched to using the coach batteries.
Considering this, the device can be quite useful, however, sometimes people might notice that the battery on their vehicle is not charging. This can be quite annoying to deal with because if the batteries shut down, you will be unable to use any electrical appliances on your vehicle. Although, you should note that several things can cause this issue which is why it is important to troubleshoot these once by one.
This will help you in finding what was causing the problem so that you can also prevent the issue from happening again. The first thing that you should do is to take a reading of the current coming from your batteries. Make sure that this is constantly at 12 volts. If it is below this then there is some problem with your batteries. However, if it is higher than this then there might be something wrong with your isolation relay. You will have to get this replaced to fix your problem.
- Clean Batteries
When it comes to fixing issues with your batteries, you should note that there are two main things that you will have to look out for. The first and most important thing is to keep a check over the water level on your batteries. If this starts to go below a specific amount then you will start to run into problems with the device. Although, this can easily be fixed by filling up your batteries with water again.
Some users debate over what type of water they should put in their batteries. However, when it comes to this, you should note that mineral water is usually good enough. Using water with extra electrolytes will make no difference when it comes to the performance or health of your equipment. On the other hand, if you have dry batteries then you can just skip this.
The second thing that you have to look out for is the terminals on your batteries. These should be covered with oxide layers if you have not been cleaned the device. With time these layers will clog your connection, preventing any current from passing through them. This is why you should wipe these off regularly to fix any issues with the equipment.
- Contact Customer Support
If you are still having trouble with your battery control center from Intellitec. Then you should note that there are a lot of parts in this device that needs to be checked. This is why it can be hard to pin down what exactly might be causing issues on it. You can try consulting the manual to help you out with this. However, the best option that you can go for is contacting the support team for Intellitec. Make sure that you tell them about your problem in detail to get a solution that can be used.