People all around the world enjoy going out on camping trips with their friends and family. These are mostly planned during vacations because people start getting bored. Although, you should note that there are lots of things that you should understand before you start your trip. Depending on what you want to do on your trip and how long you want to stay, the equipment required might vary. This is why you must consider all of these factors when packing your equipment.
Aside from this, some people also think about creating a campfire during the night. This helps in keeping you warm during cold climates and you can even cook using the fire. Although, starting a campfire requires a lot of effort and there are tons of things to look out for. Once you understand how to do all of this, you should easily be able to start your campfire. However, there are still some problems that you can run into which is why you should understand how to handle them.
How to Keep a Fire Going with Wet Wood?
One common question that many people ask is “How to keep a fire going with wet wood”. Before you can do this, you must understand why this might be required. Usually, when you are camping during a cold climate. You will notice that the low temperature can cause condensation.
This is because when the air molecules come in contact with a lower temperature than their boiling point then these will start to get back into liquid. All of this moisture then starts coming in contact with everything making it wet. This also includes all the firewood all around the forest or camping site you were camping at.
Aside from this, frequent rainfalls can also cause all the wood around your camping site to become wet. Now when you try to start your campfire using this wood or want to use it to keep your fire going then it will not be possible. Considering this, some important steps can be used to help you in using all this wet wood for your campfire. Make sure that you follow these ways to ensure that there are no problems.
1. Gathering Wood
One of the most important things that you have to look out for is gathering wood. Make sure that you collect large logs that can keep on burning for a long time. On top of this, people should also gather smaller twigs that can make the fire crack. This helps in ensuring that the flame keeps on spreading so that your campfire does not go off.
Usually, small logs can be entirely soaked in water which will be impossible to use for your campfire. You can keep these around your campfire that is already active to dry up some of the water molecules. You can then use these to keep your campfire going easily.
2. Cutting Wooden Logs
Another important step that will help you a lot with wet wooden logs is cutting them down. Make sure that you cut them from the middle to expose some of the wood that is still dry. You can then put the dry side of the wood in the campfire to continue it.
The heat coming from your campfire will then dry up most of the water from the wet log. The campfire will then keep on burning and you will have no problems with it. Keep in mind that only larger logs will have dry parts on their inside. As mentioned above, water molecules can easily reach the inside of a smaller log.
3. Use Fuel
Finally, you should note that both the steps mentioned above can be enough to keep your fire going even if the wood was wet. Although, most people also use fuel with their campfires that helps the campfire in lasting the entire night.
If you are still having trouble with the wet wood, then this fuel can be used to help you out. Make sure that you apply the fuel on the dry part of your logs first to ensure most of the water molecules come out. Finally, keeping good ventilation in your campfire is another important step to ensure that it keeps on burning.