People who own a motorhome or recreational vehicle know how many features these vehicles come with. You feel like you are traveling in your own home. As there is access to a bedroom, kitchen and even washroom.
Though, some people might want to use lots of electrical appliances in their vehicles as well. While only a few of these should efficiently work on your vehicle. It is important to note that plugging in too many will drain the battery.
This is exactly why people decide to install inverter chargers in their vehicles. There are many companies and lineups that you can go for though, out of all these the Freedom 20 is one of the best choices.
This is because the device has many features on it but there are also a few issues. Considering this, we will be using this article to provide you with a few troubleshooting steps for Freedom 20 inverter charger in case the user runs into any problem.
Freedom 20 Inverter Charger Troubleshooting
- Check Connections and Power Rating
Usually, if you notice that the inverter charger is not charging your battery. Then there are several things to look out for.
You can start with the connections and see if the power coming to the charger is correct. This should help you in narrowing down your fixes. You can disconnect the inverter charger from its connection to check the wires.
Connect a multimeter or voltmeter with it to see if the values are correct. Usually, the inverter requires a stable current of 12 volts. If the values are not up to this then you will most likely get this problem.
You must plug the device in another connection instead of this one. Even if the converter starts working, there is a high chance that It can damage your appliances with the fluctuation current.
Aside from this, you should also check if all of your wirings are in optimal condition. Even damages in these will cause problems for you. Replace any cables that have been broken to get rid of your problem.
Lastly, these can be quite dangerous to check if you are not knowledgeable about electrical stuff. This is why you should contact an electrician to help you out with this. It will also ensure that your problem gets fixed as soon as possible.
- Battery Problems
Another common issue that most people run into with the Freedom 20 inverter converter is it not functioning correctly.
While you might think this is because the inverter is bad. Usually, if there is no charging on the device then it can also be due to a bad battery. This is because the inverter charger is supplying power to the battery to keep it running.
Though, if this is not being accessed by your battery then you will notice that none of the appliances will work. This is why you must keep the batteries in your vehicle maintained at all times.
Two things that you need to look out for is if your battery has been cleaned. As well as how much water is filled in it. The water requires a refill after some time so you must keep that checked.
You can fill these batteries with distilled water and they should then start working perfectly. As for the cleaning, you should check the terminals on your battery.
If these have rust or layers of oxide formed on them. Then the user has to clean these off with warm water. Sometimes simply wiping it off might even do the trick for you.
- Installation Problems
The Freedom 20 inverter chargers can be complicated to install if it is your first time installing an inverter. Though keep in mind that the company provides their users with a manual.
This contains all the information required by the user. Considering this, simply following it will help you to get the inverter installed. However, if you had lost the manual then the user can download a copy from the internet.
Just make sure that you enter the exact model to find this. The different lineups of inverters from Freedom have different procedures so keep that in mind when installing your device.