Many companies manufacture vehicles. Although, you should note that there are different types of vehicles. The brands that manufacture these mostly focus on one category while leaving others for the rest of the brands.
Considering this, when it comes to trucks or large vehicles, Chevrolet is among the top choices. Their Chevy Silverado lineup is one of the most balanced trucks that have massive storage and amazing power.
The rest of the features used on it are easy to use and ensure that the user stays relaxed when driving it. Talking about this, the tow haul button is one of the best features as it protects your transmission while you are towing a load.
Although, some users have reported that this is running into issues. This is why we will be using this article to provide you with some troubleshooting steps that can be used if your tow-haul button is not working on Chevy Silverado.
How to Fix Chevy Silverado Tow Haul Button Not Working?
- Check Wires for The Button
The first thing that you should check on your vehicle if the tow haul button is not working is the wirings for it. This is because many people have reported that these cables had already broken or come off before they even used the button.
Luckily, these are quite easy to access and you can get started by taking off the plastic panel below your dashboard. Now take off the cover beneath your steering as well and find the wires for the button.
There should only be a single set of wires going from the button to your engine so you should not have much trouble trying to find it.
Look for any connections that have come off or cuts or damages on the cables. If you notice any then try taping it off or replacing the wires. Once done, you should now be able to start using the tow haul button without any further errors.
- Clean the Button
Sometimes even when the wires are all fine, the user can still get the same issue. The reason for this is that some dust can get stuck in the button preventing it from switching between modes.
You can either try taking off the button and then cleaning it. Alternatively, you can simply blow air through it using a compressed air sprayer or blow dryer. Once all the dust from your button has been removed, it should start working again.
- Contact Support Team
The tow-haul button not working can usually be fixed following the steps mentioned above. Considering this, if it is still not working then you might have missed a problem in the wirings.
Although, instead of checking the cables again, you should contact the support team for Chevy instead.
Talk to them about your problem and provide them with detailed information. They should then either provide you with a solution or ask you to take your vehicle to them. This should help you in getting the wires installed again or fixing whatever was causing this issue.