Recreational vehicles, motorhomes, trailers, and campers all come with numerous features on them. Some of these include having access to multiple rooms. Aside from this, there is also a lot of equipment that comes with these vehicles.
While usually, these depend on the model and company you are going to purchase your RV from. Keep in mind that you can also install third-party devices after you get your motorhome.
Considering this, one of the most common issues that people have with their vehicles is with the transmission system on them. The heavier the load on your vehicle, the difficult it will be to control it.
This is why Banks has come up with a unique device that smooths out the transmission system on your vehicle. The Banks TransCommand is extremely easy to use but there are also some problems that people have reported with it. This is why we will be using this article to provide you with a list of common issues that can be found on this device along with its fixes.
Banks TransCommand Problems
- Installation Problems
The TransCommand from Banks is an amazing device that comes with multiple accessories. Considering this, if you have bought this equipment for the first time. Then looking at all these parts might confuse you at first.
There are a lot of users that start installing the device once they get it. Although, you should note that it is important that you carefully follow the steps provided by the company. All of these should be listed on the manual you get with your device.
Once you are done with installing the product, you will notice that the equipment starts working without any issues. You will now notice that there is a black wire left hanging which might worry you.
Keep in mind that this is for the ground and you do not have to connect it anywhere in the device. If you are still having any issues when installing the product, then one option is to contact the support team for Banks. T
hey are quite helpful and should be able to answer most of your questions. They will even guide you through the installation process so do not feel hesitant to ask for help.
- Problems When Driving
Another common issue that many people using the TransCommand from Banks have reported is that the equipment gives errors when driving.
You will notice that the performance of the vehicle is worse compared to before you had installed this equipment. Considering this, the first thing that might come to your mind can be that the device is damaged or broken.
Although, you should note that there are several other reasons for running into problems like this other than the equipment being faulty.
The first thing that you should check is if all the connections are in place. Sometimes these might accidentally come off or get cut. If this happens then you will have to replace any damaged cables and then tightly install them back in.
Aside from this, you should note that the plugs used to connect the device can sometimes get covered in dust. This can cut the connection between the device and your transmission system.
This is why you should make a habit of cleaning the wires and equipment frequently. If done correctly, you will notice that your vehicle now works much better and most issues with this device are avoided.
- Equipment Getting Damaged
If you have checked all the wirings of your device but is still giving you trouble. Then there is a chance that your equipment has gotten damaged. If this happens then your only option will be to contact the support team for Banks.
They are quite helpful and you can both email them or call them directly. Their details are given on their official website so visit it to contact them.
You will then have to give them detailed information about your problem so that they can identify what is causing it. Make sure that you do not leave out any details as this will make it hard for the team to pin down your problem.
The company will then provide you with solutions that can be used to fix your issue. In some cases, you might also get a replacement unit from them however this depends on what the problem was.