People all around the world will plan camping trips during their vacations. This lets them enjoy the wildlife while they also make amazing memories. Although, some enthusiasts will go out on trips occasionally.
This is why they must bring the best possible equipment with them. Considering this, these users will purchase large vehicles like motorhomes and RVs that allow them to store all of their luggage. Although, when it comes to purchasing an RV of your own.
There are some important things that you have to look out for. These include the features of your vehicle as well as what appliances are installed in it. If you are someone who enjoys visiting cold areas then a furnace will be essential for you.
Talking about this, the Atwood 8900 furnace is an amazing device that comes with numerous features. But you have to keep in mind that there are also some issues that this can run into. This is why we will be using this article to provide you with some common problems that can be found on Atwood 8900 furnace along with troubleshooting steps.
Atwood 8900 Furnace Troubleshooting
- Furnace Not Heating
The most common issue that people using the Atwood 8900 furnace have reported is that the device is not heating their vehicle. Considering this, there are many reasons why you can get this problem on your device. However, to fix this, you have to first pin down the reason behind it is. This is why you should carefully go through every troubleshooting step.
The process will help you in understanding how your furnace works and preventing similar problems in the future. One common reason why the device might not be heating can be that you have not set up the temperature settings properly. These have to be configured from the control panel of your unit. Make sure that the temperature is set to a higher number than what is currently in your vehicle.
You will then also have to increase the fan speed on this unit to ensure some air is being thrown out. If none of these works then the problem might be from your vents instead. These can get a lot of dust stuck in them which prevents air from blowing out of them. Simply cleaning all of this will help you in fixing the problem. Although, make sure that you use a vacuum to clear all the debris as dust as the vents are usually quite narrow.
- Heater Not Starting
Sometimes when trying to use your furnace, you might notice that it is only blowing out simple air. This indicates that only the fans are working and the heater is switched off. While some troubleshooting steps for this are the same as above. You should note that the problem can also be from your sensors. These are responsible for detecting the temperature inside your vehicle.
Then the system automatically adjusts the heat on it to keep your room warm but not too hot. In case these sensors start to go bad, the device will be unable to tell what temperature your vehicle currently is at. This will then cause the system to stop heating any further. You can start by trying to clear all the debris and dust stuck on your sensors.
These are extremely sensitive so make sure that you do not apply too much pressure. If done properly then your problem should now be fixed. It is recommended that you try using a pin to clear all this dust. Aside from this, if your problem persists then you will have to get a new set of sensors installed.
Contact Customer Support
If you are still having any issues on your device and are unable to identify the reason behind them. Then contacting the support team for Atwood will be your best choice. Just make sure that you give them detailed information about your problem. This will help them in identifying what might be causing it. The brand will then provide you with some solutions that can be used. You can also ask the company for any spare parts that you might need for your device. These might be expensive but it is still better than using third-party replacement parts on your furnace.