People all around the world enjoy going out on camping trips with their friends and family. These can be a lot of fun as you get to explore new areas with your loved ones. Although, when it comes to enthusiasts, these users purchase large vehicles for their trips. This is because they want to stay for several weeks or even months at times. Considering this, they must have a vehicle that can help in preventing problems.
Motorhomes and RVs do this as well as ensure that campers will stay relaxed on their trips. These vehicles also allow people to use electrical appliances even while they are traveling. Although, there are also some issues that you can run into with this feature. People use electrical inverters to keep their batteries charged but running into issues with these can be quite annoying. This is why we will be using this article to provide you with a list of common problems that you can get on the Magnum Energy ME2012 along with ways to fix them.
Magnum Energy ME2012 Problems
1. Inverter Not Working
While motorhomes might provide people with the ability to use electrical appliances, you should note that the overall power available is limited. This is why you must keep a check over how much electricity is being used. Inverters like the Magnum Energy ME2012 help in ensuring that your batteries are kept charged. Additionally, you can use all of this power whenever you want to.
Although, one common issue that people report about with this device is that it is not working. The main reason behind this can be that the connections for your inverter are not installed properly. Before you start troubleshooting, it is important to note that checking electrical wires on your own can be quite dangerous. This is why you should contact a professional instead.
They will look thoroughly into the problem and fix it for you. However, if you want to get started on your own then you can first check if all the wires are connected. Sometimes these can get disconnected or damaged. Any cables that you notice have come off should be installed back in. As for any cracks or breaks on wires, you have to get these replaced with new ones. Once done, you can then use a voltmeter to check the resistance in your cables. This should help you in confirming if the problem is fixed or not.
2. Batteries Might Be Covered In Dust
If your inverter starts but is still not working, then there is a high chance that your batteries might be faulty. The only reason why these are not getting charged can be that the terminals are blocked. This is why you must keep your batteries maintained at all times. Make sure that you have them filled up with water and clean off their terminals.
These can sometimes get clogged from dust or layers of sulfate. This will then prevent current from passing through the terminal which causes the batteries to stop working. If simply brushing off the dust does not work, then pour warm water on the terminals. This softens up the layers so that you can easily remove all of them.
Your battery might require you to jump-start it the first time, but it should then work without any issues. Some people might notice that the charge on their batteries does not last as long as before. If that is the case, then your batteries might be dying out. You will have to get these replaced with new ones to fix your problem.
3. Faulty Inverter
Finally, if you have gone through all the steps mentioned above but you are still getting the same problem. Then there is a high chance that your inverter might be faulty. You should keep in mind that these devices get damaged over time, and they will eventually stop working.
The only thing that you can do is contact the support team for Magnum Energy. They will look into your issue and provide you with a solution. Make sure that you do not leave out any details about your problem as this helps in getting rid of it as soon as possible.